Austin Hughes IPM-02 - Manual (Page 22)

www.austin-hughes.com UM-IPM-02-Q414V3 P.17
Change port no. of web server.
If users want to use another port no. instead of 80, please take the following steps after
InfraPower Manager IPM-02 “ First time start-up setting “ is completed.
Step 1. Go to the path of web server being installed. ( Default: C:\AppServ\Apache2.2\conf\ )
Step 2.
Open “ httpd.conf “ & change “ Listen 80 “ to “ Listen xx “ where xx means the port
users want to use save the change
Step 3.
Restart Apache services.
Go to Control Panel > Administrative Tools > Services > Apache2.2 & Click “ Restart “
Complete
Step 4.
Refresh the Web browser.
< 2.7 > Change Port no. of Web Server