Austin Hughes IPM-02 - Manual (Page 25)

www.austin-hughes.com UM-IPM-02-Q414V3 P.20
In < Setup > page, administrator can activate max. 15 IP dongle groups & set the group command
password
Step 1. “ Activate “
IP dongle group 01
Step 2. Input “ IP address “ & “ password “ of the IP dongle
Step 3.
“ Enable “ Command password
Step 4. Input “ New command password ”. Default is “ 00000000 “
Step 5.
Input new command password in “ Confi rm new password “ again.
Step 6. Click “ Apply “ to fi nish the IP dongle group setup
Step 7.
Repeat step 1 to 6 for other IP dongle groups if necessary
< 3.1 > System setup