Austin Hughes IPM-02 User Manual

Page 44

Advertising
background image

www.austin-hughes.com

UM-IPM-02-Q414V3

P.39

Meter for WS kWh switched & W kWh Monitored PDU

1. What is feature of the W kWh Monitored PDU?
The W kWh Monitored PDU offers simple & highly reliable power distribution to multiple equipments,
and built-in a 1.8” LCD meter indicates the total energy consumption of equipment connected to the
PDU. The digital ampere meter has an interface which can connect to an IP dongle to the ethernet net-
work, which allows managers to real-time remote monitor the PDU load thru the InfraPower manager
(IPM-02).

2. What is feature of the WS kWh Switched PDU?
The WS kWh Switched PDUs offers the same features as W kWh Monitored PDUs, with an addition re-
mote control power capability to individual PDU outlets. The remote outlet power control allows power
on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use
of individual outlets.

3. Can the WS kWh switched & W kWh Monitored PDUs cascade together?
Yes, the WS kWh switched & W kWh monitored model PDUs can connect together as a cascade
chain.

4. If one of the cascaded WS kWh switched / W kWh Monitored PDU loses power, will it affect
other PDUs in the same chain?
No, the other cascaded WS kWh switched & W kWh Monitored PDUs in upper & lower level will not
be affected.

5. What is the maximum cabling distance between two cascaded PDUs?
Up to 20 meter (66 feet) of CAT. 5 / 6 cable.

6. What is the maximum cascade level of the WS kWh switched & W kWh Monitored PDU in a
chain?
16 levels

Others

1. What is the default outlet status of WS Switched PDU ?
The default outlet status is ON.

2. Will the PDU settings remain unchanged after power OFF?
Yes, the settings will remain unchanged such as PDU Name, Location, Alarm amp., Low alert amp.,
Outlet Name......

3. Does the InfraPower PDU has the overpower protection?
Yes, the PDU provides the resettable fuse or optional circuit breaker for the overpower protection.

4. What is the standard inlet cable length of InfraPower?
3 meter ( 9.9 feet ).

5. Where can I fi nd the Catalogue / User manual /Model list / Wire diagram of InfraPower PDUs?
Please visit the www.austin-hughes.com

6. How can we get a further support?
Please send the email to [email protected] or [email protected]

Part VII.

FAQ

Advertising