Austin Hughes IPM-01 User Manual
Page 17
www.austin-hughes.com
UM-IPM-01-Q213V2
P.13
Step 2. System setup
In < User > page, the administrator can create max. 5 concurrent login users and set the user name
& password. After this, all users can take the three steps above to access IPM-01.
Step 1. Open Internet Explorer ( I.E. ), version 7.0 or above
Step 2. Enter the IP address of management PC into the address bar
( If fail to access, please ask MIS to check the service port of
the management PC )
Step 3. Enter the user name ( the default is admin )
Enter the password ( the default is 00000000 )
Users can follow below step 1 - 3 to access the management PC and InfraPower Manager IPM-01
Only Administrator is authorised to access < User >, < Setup >, < Alarm >, < Scan >, < Refresh >, < Temp. >, <
Backup > & < SNMP > for initial system setup
Login user
Router or hub
1
2
3
4
5
Login user
Login user
Login user
Login user
Management PC
InfraPower Manager IPM-01