Bonaire Ducted RAC Inverter - Manual (Page 13)

Page 13
OPERATION
HOUR Button
1. Hour setting: Press the “HOUR” button to set the clock, and the number will display an integer from 0 to
23.
2. Timer setting: Press the “HOUR” button to set the hour, and the corresponding number will display an
integer from 0 to 23.
CONFIRM Button
1. The Week, hour, minute and timer setting: The user can press this button to confirm operation.
2. Timer setting: user can press the button for 3 seconds continuously to go to timer setting.
TIMER ON Button & TIMER OFF Button
1. Press the “TIMER ON” button to turn on the unit at a certain time, and the LCD screen will display “ON”.
2. Press the “TIMER OFF” button to turn off the unit at a certain time, and the LCD screen will display
“OFF”.
3. To activate or cancel setting: After setting the timer, press the “TIMER ON” and “TIMER OFF” button at
the same time for 3 seconds, then the timer setting will stop working and the corresponding sign shown
on the LCD display screen will disappear. If the timer setting is switched off, the user can press the
“TIMER ON” and “TIMER OFF” button at the same time for 3 seconds to activate the latest timer
setting, and the LCD screen will display the timer.
4. Timer setting in the “multi-days” timer: press the “Multi-day timer” button to ignore a certain day.
Child Lock
Keyboard lock: When the wall controller is on, press the “CHECK” and “RESET” button at the same time
for 3 seconds. The wall controller keyboard will then be locked, and only the “ON/OFF” button is effective.
The wall controller will not receive any signals from the remote controller. Pressing the “CHECK” and
“RESET” buttons at the same time for 3 seconds again to activate the keyboard if the keyboard is locked.
SET Button
1. Calendar Week Setting: Press the “SET” button to go to the calendar week setting.
2. Hour and minute settings: Press the “SET” button twice to enable the hour and minute settings on the
calendar.