Bonaire Ducted RAC Inverter - Manual (Page 14)

Page 14
OPERATION
Specific Operating Instructions
Original status and power-off function
When the wall controller is powered, the LCD display will illuminate all characters for 2 seconds, and then
the wall controller will initiate the latest setting before the wall controller is powered off, including the unit,
temp, set, fan, mode, time and timer settings.
Timer & Time function
1. Week & time setting:
A. Week setting: Press the “SET” button, then press the “WEEK” button to choose from Monday to
Sunday, and then press the “CONFIRM” button to confirm the setting.
B. Time setting: Press “SET” button twice, then press the “HOUR” button, the hour number will change at
an integer from 0 to 23; when pressing the “MIN” button, the minute number will change
at an integer from 0 to 59; pressing the “CONFIRM” button will confirm the setting. Press
and hold the “HOUR” button, the hour’s number will increase by 1 every second; Press
and hold the “MIN” button, the minute number will increase by 10 every second.
2. Timer setting: Press the “CONFIRM” button for 3 seconds to start the timer setting.
A. Confirmation on day timer:
a. Only choose a certain day of a week
Press the “WEEK” button to select a certain day from Monday to Sunday, and the LCD screen will display
the abbreviation such as “MON”, “TUE”, “WED”, “THU”, “FRI”, “SAT”, or “SUN” accordingly; These
abbreviations will flash at once per second; after choosing a certain day, press the “CONFIRM” button to
confirm the setting, and the LED will display the target setting.
b. Multi-day of the week (NB*: the timer setting between these days is same)
When “MON TUE WED THU FRI SAT SUN” is flashing, press the “MULTI-DAY TIMER” button to choose a
certain day, and then press the “MULTI-DAY TIMER” button again to choose another day; Press the “TIMER
ON” or “TIMER OFF” button to ignore certain days; After choosing a certain day, press the “MULTI-DAY
TIMER ” button again to cancel their choice; After choosing target days, press the “CONFIRM” button to
confirm their choice.
B. Timer confirmation on a period of time:
Press the “TEMP UP” or “TEMP DOWN” button to choose a different period of time e.g. 1, 2 or 3, and then
press the “CONFIRM” button to confirm the corresponding target period of time, this will then be displayed
on the LCD screen. For example, if you select a period of time “2”, the LCD will display”2” on the screen.