ClassCo InTouch 5000 - Manual (Page 16)

complete number for which you want to select a category
appears on the display screen of the unit, go to the next step
3. With the desired number on the display screen of the unit,
press the MODE key until SELECT CATEGORY appears on the
display screen.
4. Press either the forward or reverse REVIEW keys until the
category you want for the caller is announced.
5. Press the PROGRAM key to assign the category to the caller.
How do I review what I’ve Programmed?
Press and release the MODE key until REVIEW CATEGORY ap­
pears on the display screen. Then press one of the REVIEW keys
to scroll through the numbers for which you have programmed
categories. You’ll hear the category programmed for each number
announced as you scroll through the numbers.
How Do I Delete What I’ve Programmed?
Follow the steps above to review what you’ve programmed until
you hear the caller you want to delete. Then press the CLEAR key.
The category association with that caller will be deleted.
Dial Back
You can dial back callers directly from the call log. Use the REVIEW
keys to locate the person you want to call. With the call information
displayed on the screen, pick up the phone like you normally do to
make a call, but instead of dialing, press the MODE/DIAL key on the
unit. If you’re placing a call that requires dialing only 7-digits, press
the MODE/DIAL key again to complete the call. If 10-digit or 1+10-
digit dialing is necessary to place the call, use the REVIEW keys to
select the appropriate dialing method, then press the MODE/DIAL
key to complete the call.
16