ClassCo InTouch 5000 - Manual (Page 17)

Message Waiting Notification
Your InTouch 5000 will alert you if you have voice mail messages.
This requires a special service from your local telephone com­
pany. The unit will detect both FSK and stuttered dialtone (SDT)
message notification signals. When message waiting is detected,
the unit displays a message waiting icon on the LCD, and will flash
its LED fast. You can choose to have an audible notification (beep
every minute) by selecting the MSG WAIT BEEP option in the cus­
tom setup options.
Custom Setup Options
You can customize the way your InTouch 5000 works. Hold down
the MODE key and momentarily press the PROGRAM key to enter
SETUP MODE. You can change the option by pushing the PRO­
GRAM key, and can go to the next option by pressing the MODE
key.
RESET – Clears call log and all category associations. Tests
memory. Returns to standby mode in about 30-seconds.
ENGLISH – Selects between English and Spanish. English is
default.
MSG WAIT BEEP – Turns ON/OFF audible message waiting
notification. Default OFF.
CW CATEGORY – Turns ON/OFF category-only announce­
ments during call waiting calls. Default OFF.
17