Jt922 operator’s manual – Ditch Witch JT922 User Manual
Page 75
Transport - 74
JT922 Operator’s Manual
Tow
CMW
Tow
Under normal conditions, drilling unit should not be towed. If unit breaks down and towing is necessary:
•
Tow for short distances at less than 1 mph (1.6 kph).
•
Attach chains to indicated tow points facing towing vehicle.
•
Use maximum towing force of 1.5 times unit weight.
•
disengage power to tracks.
To disengage track hydraulics:
1.
Loosen locknut (B).
2.
Turn screw (A) on each counterbalance valve
clockwise until it stops.
3.
Repeat on other track.
To engage track hydraulics:
1.
Turn screw (A) on counterbalance exactly
same number of turns counterclockwise.
2.
Tighten locknut (B).
3.
Repeat on other track.
To attach chains to tow points, determine which points are facing towing vehicle.
Loop chains around crossmember (either front or
back) on drill frame.
IMPORTANT: When hydraulics are disengaged, unit has no brakes.
IMPORTANT: Be sure to count number of
turns.