Mv800 operator’s manual – Ditch Witch MV800 User Manual
Page 52
Advertising
MV800 Operator’s Manual
Vacuum and Pothole - 51
Unload to Another Tank
CMW
®
5.
Move valve handle counterclockwise to engage “reverse flow” mode and start engine. Material will flow
into offboard tank.
6.
Increase throttle as desired to transfer material.
7.
When transfer is complete, throttle down completely and turn off engine. Close vac tank drain/outlet
valve.
8.
Close offboard tank inlet valve and disconnect hose from offboard tank inlet valve.
9.
Move handle clockwise to “vacuum” mode and turn on engine.
10. Open vac tank drain/outlet valve. Material will empty from transfer hose.
11. Close vac tank drain/outlet valve, throttle down and turn off engine.
12. Disconnect transfer hose from vac tank.
Advertising