Ditch Witch MV800 - Manual (Page 70)

MV800 Operator’s Manual
Service - 69
10 Hour
CMW
®
Check Hydraulic Fluid Level
Check hydraulic fluid level every 10 hours. Maintain
fluid level at 3/4 tank when engine is off and fluid is
cool. Add THF at hydraulic fluid fill (shown) as
necessary.
Check Blower Oil Level
With frame level, check blower oil at sight glass
(3) every 10 hours. Add SGL at fill (2) as
necessary to maintain oil level at halfway point on
sight glass (3). Do not overfill.
Check Blower Belt Tension
Check belt every 10 hours for correct tension,
damage or wear. Idler pulley tensioner should be
set to 70 lb of force. Verify that the indication
marks on tensioner are in the same position as
initially set, or apply 10 lb of force to the belt and
check that deflection is .25-.375” (6-10 mm).