Mv800 operator’s manual – Ditch Witch MV800 User Manual

Page 69

Advertising
background image

Service - 68

MV800 Operator’s

Manual

10 Hour

CMW

®

Check Hydraulic Hoses

Check hydraulic hoses for leaks every 10 hours.

Pressurized fluid or air could pierce skin and cause severe

injury. Refer to operator’s manual for proper use.

270-6035

To help avoid injury:

Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
Lower, block, or support any raised component with a hoist. Cover connection with heavy cloth and
loosen connector nut slightly to relieve residual pressure. Catch all fluid in a container.

Before using system, check that all connections are tight and all lines are undamaged.

Use a piece of cardboard or wood, rather than hands, to search for leaks.

Wear protective clothing, including gloves and eye protection.

If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.

Advertising