Procedure, Rt120 operator’s manual – Ditch Witch RT120 User Manual

Page 100

Advertising
background image

RT120 Operator’s Manual

Transport - 99

Tow

CMW

Tow

Under normal conditions, tractor should not be towed. If tractor becomes disabled and towing is
necessary:

Do not tow for more than 200 yd (180 m).

Tow at less than 1 mph (1.6 km/h).

Steering will be very difficult.

Procedure

1.

Engage parking brake.

2.

Block front and rear tires to prevent unit
from rolling.

3.

Attach tow line to all available tie-down
points facing towing vehicle.

4.

Activate the tow valve (shown).

Remove floor plate.

Locate two hex-shaped relief valves.

Turn each valve (whole hex)
counterclockwise three complete
revolutions.

Replace floor plate.

5.

Remove blocks.

6.

Fasten seat belt and adjust seat belt.

7.

Disengage parking brake.

8.

After towing, turn tow valve clockwise three complete revolutions.

Read operator’s manual. Know how to use all controls before operating

machine. When you see this sign

on the machine or in the manual, read it and use

caution. Your safety is at stake.

NOTICE: Do not turn tow valve
more than three revolutions.

Warning: While towing, unit will not have brakes.

t41om009w.eps

Advertising