Setup, Before first use and after replacing bits, Rt120 operator’s manual – Ditch Witch RT120 User Manual
Page 139
Saw - 138
RT120 Operator’s Manual
Setup
CMW
Setup
Before First Use and After Replacing Bits
Check Bit Clearance
1.
Check that all bits are properly secured.
2.
Check that all bit retaining rings are secure.
3.
Spin wheel by hand and listen for bits hitting diverters.
4.
If bits hit diverters, repeat steps 1-3 to make sure bits are in the proper location and secured at proper
depth.
5.
If bits do not hit diverters:
•
Set parking brake.
EMERGENCY SHUTDOWN - Turn ignition switch to STOP.
Crushing weight could cause death or serious injury. Use proper
procedures and equipment or stay away.
To help avoid injury: Use attachments or counterweights to make front and rear loads balance when all
attachments are raised. Contact your Ditch Witch dealer about counterweighting for your equipment.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
To help avoid injury: Comply with all utility notification regulations before digging or drilling.
Read operator’s manual. Know how to use all controls before operating
machine. When you see this sign
on the machine or in the manual, read it and use
caution. Your safety is at stake.
NOTICE: Unless otherwise instructed, all service should be performed with tractor off.