Ditch Witch RT120 - Manual (Page 67)

Controls - 66
RT120 Operator’s Manual
Backhoe Console
CMW
5. Remote throttle enable To enable remote throttle
control, press top.
To disable remote throttle
control, press bottom.
Note: This switch must be returned to
the OFF position for normal throttle
control at tractor.
6. Work light switch To turn on, press right.
To turn off, press left.
7. Swing lock pin To lock:
• Engage stow lock.
• Insert swing lock pin into
hole (1).
To release:
• Remove pin and store in
hole (2).
• Release stow lock.
This pin locks boom from swinging
during transport.
NOTICE: Do not store pin in holes
marked with an “X.” Backhoe could
swing and destroy pin.
8. Remote ground drive
control To move tractor forward,
push.
To move tractor backward,
pull.
NOTICE:
• This control is disabled if tractor
seat is occupied.
• Tractor must be in low speed for
remote ground drive to function.
• Ensure that backfill blade, if
equipped, and stabilizers are
raised before operating this
control.
• Do not move more than 30’ (10
m) at a time.
Item Description Notes
c00ic030w.eps
c00ic216h.eps