Ditch Witch Zahn - Manual (Page 49)

Transport - 48
R150/R230/R300 Operator’s Manual
Haul
CMW
Unload
1. Lower trailer or ramps and remove tiedowns.
2. Unlock articulation joint.
3. Open fuel tank shutoff valve.
4. Start engine and disengage parking brake.
5. Pull front end lift control to raise front end, but keep it low.
6. Slow engine to low throttle and slowly back unit down trailer or ramps.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
Tipover possible. Machine can tip over and crush you. Always operate
with heavy end uphill.
IMPORTANT: Do not remove front end from InterChange connection before loading or unloading power
unit.
NOTICE: If unloading from tilt-bed trailer, be prepared for trailer bed to tilt.