Ditch Witch Zahn - Manual (Page 61)

Complete the Job - 60
R150/R230/R300 Operator’s Manual
Restore Jobsite
CMW
Restore Jobsite
After product is installed, return spoils to the trench with optional backfill blade.
Backfilling
1. Turn off engine.
2. Install backfill blade and secure with pull pins,
as shown.
3. Start unit.
4. Position unit at end of trench, several feet
from spoils. Aim unit at outer edge of spoils.
5. Adjust backfill blade to fit land contour.
6. Move outer edge of spoils toward trench.
Take two or more passes at spoils rather than
moving all spoils at once.
7. Repeat on other side of trench, if necessary.
8.
Rinse Equipment
Spray water onto equipment to remove dirt and mud.
Stow Tools
Make sure all tools and accessories are loaded and secured on trailer.
NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged. Wipe
down instead.