Drill, Rt120q operator’s manual – Ditch Witch RT120 Q User Manual
Page 126
Advertising
RT120Q Operator’s Manual
Drill - 125
Drill
CMW
Drill
1.
Start tractor’s engine and begin clockwise (forward) rotation.
2.
Slowly advance tractor while maintaining clockwise rotation.
EMERGENCY SHUTDOWN: Release drilling control and turn ignition switch to STOP.
NOTICE:
•
Drilling too quickly causes bit to drift off course and may bend drill rod. After bore path is
established, speed may be slightly increased.
•
If drill rod starts to bend, stop forward movement of unit and back the unit slightly until rod
straightens. Do not drill with bent rod.
•
If drill rod hits an obstruction, rotate drill string counterclockwise to back up slightly.
Advertising