EarthQuake E43 - Manual (Page 12)

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
Operator's Manual
Earth Auger Powerhead E43/E43CE
12
SErVICE INFOrmatION
At Ardisam, we build quality and durability into the design of our prod-
ucts; but no amount of careful design by us, and careful maintenance by
you, can guarantee a repair-free life for your machine. Most repairs will
be minor, and easily fixed by following the suggestions in the trouble-
shooting guide in this section.
The guide will help you pinpoint the causes of common problems and
identify remedies.
For more complicated repairs, contact your place of purchase or Ardisam,
Inc. for an authorized service center in your area. Ardisam will make the
necessary repairs if a service center is not available. A parts catalog is
included in this section.
We will always be glad to answer any questions you have, or help you
find suitable assistance. To order parts or inquire about warranty, call,
write or e-mail us at the address found below, under the section order-
ing repair parts.
OrDErING rEPaIr PartS
Parts can be obtained from the store where your earth auger was
purchased, direct from the manufacturer or online. To order from the
manufacturer, call, write or e-mail:
ardisam, Inc.
1160 Eighth avenue, Cumberland, Wisconsin 54829
1-800-345-6007 • 1-715-822-2415
E-mail: [email protected]
www.getearthquake.com
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
noTE: When ordering from the manufacturer, there is a $10.00
minimum order.
CautION
PraCtICE SaFEtY at aLL tImES. ENGINE muSt BE turNED
OFF aND aLLOWED tO COOL, aND SPark PLuG WIrE
muSt BE DISCONNECtED BEFOrE attEmPtING aNY maIN-
tENaNCE Or rEPaIr.