EarthQuake E43 - Manual (Page 5)

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 5
Operator's Manual
Earth Auger Powerhead E43/E43CE
aSSEmBLY
tOOLS rEquIrED:
• Two (2) 9/16” Wrenches
aSSEmBLY INStruCtIONS: (SEE FIGurE 1)
1. Insert the output shaft of the E43 transmission (A) in the open end
of the Flex Coil ShockTop (B).
2. Line up the bolt holes through the Flex Coil ShockTop and the
output shaft of the transmission.
3. Place the included 3/8-16 x 1.5 inch bolt (C) through the bolt hole.
4. Hand-thread the 3/8-16 “Bi-way” lock nut (D) on the bolt.
5. Using two 9/16 inch wrenches, securely tighten the nut and bolt.
E43 and EA6F shown. Instructions also apply to EA8F and EA10F
augers.
A
B
D
C
Figure 1