Echelon OpenLDV - Manual (Page 105)

OpenLDV Programmer’s Guide 97
For xDriver to receive these requests for connection, the xDriver
Connection Broker must be running. For information about starting the
Connection Broker, see Starting the Connection Broker on page 135.
To enable uplink sessions, select the Enable Uplink Sessions checkbox,
configure the rest of the fields on the tab, and click OK to save your
changes.
5. Select the Protocol Options tab to configure protocol options for
xDriver, as shown in Figure 12.
Figure 12. xDriver Profile Protocol Options Tab
6. Select the Recovery Options tab to set the recovery options for xDriver,
as shown in Figure 13 on page 98.