Create a custom xdriver profile – Echelon OpenLDV User Manual
Page 130
122
Extending xDriver
Project : error PRJ0050: Failed to register output. Please
try enabling Per-user Redirection or register the component
from a command prompt with elevated permissions.
Start an elevated command shell (right-click the Visual Studio 2008 Command
Prompt shortcut and select Run as administrator), change to the folder that
contains your built DLL, and run the following command:
REGSVR32 SampleLookup.dll
Create a Custom xDriver Profile
Use the OpenLDV xDriver Profile Editor to create a custom xDriver profile for
your custom xDriver lookup extension.
1. Select Start → Echelon OpenLDV 4.0 SDK → Developer Utilities →
xDriver Profile Editor to open the OpenLDV xDriver Profile Editor.
2. Click Add to open the New Profile dialog, as shown in Figure 25.
Figure 25. xDriver Profile Editor New Profile Dialog
3. Enter a profile name (“Sample” for this example) in the Profile Name
field.
4. Click OK to close the New Profile dialog.
5. For the General tab of the OpenLDV xDriver Profile Properties dialog for
the new profile, enter a description in the Profile Description text box, as