Echelon LonMaker - Manual (Page 139)

LonMaker User’s Guide 123
You can change or disable the connection description used for each condition in the automatic
connection description selection process. If you disable the connection description for a given
condition, the LonMaker tool will select the next defined connection description. You can also change
the maximum number of target network variables used to select between the Alias Unicast and Default
conditions. The default value of 5 provides a good balance between total transaction time and network
resource usage.
Clicking Details opens the Connection Details dialog, in which you can modify pre-defined
connection descriptions or create new ones.
Changing the Connection Description for a Connection
You can quickly change a connection description used for a connection by manually selecting a new
one. To manually select a new connection description, right click the connection, point to Set
Connection Description, and then click the desired connection description on the shortcut menu. To
disable automatic connection description selection, select a connection description that does not start
with “SCD_”. To enable automatic connection description selection, select <Recompute>.