Commissioning an i.lon ip-852 router, Commissioning using device discovery, Commissioning an i .lon ip-852 router – Echelon LonMaker User Manual
Page 172
156
Installing Networks
scanner vendor for prices on the different scanner types. If you are using a LonPoint device, or a
device with a similar bar code label, it is recommended that you use a gun-style laser or LED scanner.
One scanner that you can use with the LonMaker tool and LonPoint devices is the Symbol
Technologies LS 3000, which is made available by Barcode Logics. The Neuron IDs for LonPoint
devices are printed on their labels in Code 39 format. See your scanner documentation for instructions
on programming the scanner.
Commissioning an i.LON IP-852 Router
To commission an
i
.LON IP-852 router such as an
i
.LON 100
e
3 Internet Server with IP-852 routing,
i
.LON 600 IP/LonWorks Server, or
i
.LON 1000 Internet Server, follow these steps:
1. Start the L
ON
W
ORKS
/IP Configuration Server. To start the L
ON
W
ORKS
/IP Configuration Server,
click Start on the taskbar, point to Programs, then point to the Echelon LonWorks-IP
Configuration Server folder, and select Echelon LonWorks-IP Configuration Server.
2. Right-click the router shape and then select Commission from the shortcut menu. The
Commission Device Wizard appears.
3. If you are commissioning an
i
.LON 1000 Internet Server, select the initial state and source of the
configuration property values for the web server.
4. Select the initial state of the
i
.LON IP-852 router. Click Next.
5. Select the device identification method. Click Next.
6. Press the service pin of the
i
.LON IP-852 router, or manually enter its Neuron ID and click Finish.
The
i
.LON IP-852 router will be commissioned.
Commissioning Using Device Discovery
You can install a network by automatically discovering the devices to be commissioned. With the
device discovery method, the LonMaker tool searches the physical network for uncommissioned
devices that match device shapes defined in your LonMaker drawing. Devices are matched based on
their program ID and channel. If there is no unique match, you can select the appropriate device by
winking it or by pressing a service pin. After discovered devices are matched with defined shapes, you
can have the LonMaker tool commission the devices. You can use the device discovery method to
quickly install networks that have been designed with the engineered system installation scenario.
To install a network using the device discovery method, follow these steps:
1. Open
the
LonMaker menu and Select Discover Devices. The Device Discovery Filters dialog
box opens.