Echelon LonMaker - Manual (Page 307)

LonMaker User’s Guide 291
3. Transfer the LonMaker license into the target computer.
a. On the target computer, if you are using a USB drive, floppy disk or other removable media to
transfer the license, insert it into the target computer.
b. Click Start, point to Programs, point to Echelon LonMaker, and then click LonMaker
License Transfer Utility. The LonMaker License Transfer wizard opens. Click Next.
c. Note: If the target computer already contains a license, the transfer will replace this license
and delete any credits on the target computer.
d. Click Step 3. Transfer License into New Computer and then click Next. The License
Transfer Utility transfers the license to the target computer and the following dialog appears:
e. Click Finish. You can now run the LonMaker tool on your target computer.
The LonMaker tool is disabled on the source computer. To install a new LonMaker tool on the source
computer, you must license a new copy of the LonMaker tool and order a new LonMaker license. You
can order a new LonMaker license by opening the LonMaker menu and clicking LonMaker Credits.
Creating LonMaker Demonstration Networks
You can use the LonMaker tool in demo mode to create LonMaker demonstration networks, which are
typically used for training or sales demonstrations. In a LonMaker demonstration network, you can
commission a maximum of six devices without using LonMaker credits. If you are using an activated
copy of the LonMaker tool in demo mode, a “LonMaker Demonstration Network” banner appears in
the background of each page of the demo network.
LonMaker demonstration networks have the following restrictions:
• They cannot be used for existing production LonMaker networks.
• They cannot be converted to a production network.
• They are limited to a maximum of six devices.
• They cannot be accessed remotely.
• They cannot be used to purchase LonMaker credits.