Echelon LonMaker - Manual (Page 360)

344 Appendix A - Setting LonMaker Default Options
Warnings Options
The Warnings category contains the following options, which are all selected by default.
Enable Warning When
New Device Requires
Commissioning
Displays a message when you create a new device that needs to be
commissioned.
Scope: Current network, current LonMaker computer
Enable Warning When
Functional Block has
no Matching Device Displays a message when you drag a functional block shape onto a
drawing but there is no compatible device on the drawing page.
You will be prompted to select another subsystem.
Scope: Current network, current LonMaker computer
Enable Warning When
Commissioning OffNet Displays a message when you commission a device or router
while the LonMaker tool is OffNet. Commissioning while the
LonMaker tool is OffNet sets the Neuron ID of the device shape,
but it does not affect the physical device.
Scope: Current network, current LonMaker computer
Enable Warning When
Incompatible
Application is Loaded Displays a message if you attempt to load an incompatible
application image into a device.
Scope: Current network, current LonMaker computer
Enable Warning
Before Upgrading
NSD
Displays a message when upgrading the LNS network interface,
which is represented by the network service device (NSD) shape
in the LonMaker drawing.
The LonMaker tool upgrades the network interface when you
upgrade from a version of the LonMaker tool before Release 3, or
if you are switching between a fast LNS network interface (layer
2) and a legacy LNS network interface (layer 5). If you attempt to
do either of these, the LonMaker tool will ask whether to upgrade