Echelon LNS - Manual (Page 281)

LNS Programmer's Guide 267
Windows plug-and-play standard. This hardware
may be used as an LNS high performance network
interface by selecting PCL20VNI from the NI
Application field of the L
ON W ORKS Plug 'n
Play control panel. It can be used as a standard
interface by selecting NSIPCLTA from the NI
Application field.
PCLTA-21 Echelon’s PCLTA-21 card is a high performance
network interface for desktop and embedded
personal computers equipped with a 3V and 5V
32-bit PCI interface and a compatible operating
system. This network interface is designed for use
in networks that require a PC to monitor,
manage, or diagnose a network, and is ideal for
industrial control, building automation, and
process control applications. The PCLTA-21 card
features support for TP/XF-78, TP/XF-1250,
TP/FT-10, and RS-485 transceivers, downloadable
memory, a network management interface, and
Plug n’ Play capability with the Microsoft
Windows 2000 and Windows XP operating
systems. The four versions of the PCLTA-21
interface with integral twisted pair transceivers
support the TP/FT-10 (Model 74501), TP/XF-78
(Model 74502), TP/XF-1250 (Model 74503), and
TP-RS485 (Model 74504) channels, respectively.
This hardware may be used as an LNS high
performance network interface by selecting
PCL10VNI from the NI Application field of the
L ON W ORKS Plug 'n Play control panel. It can
be used as a standard interface by selecting
NSIPCLTA from the NI Application field.
PCC-10 The PCC- 10 is a type II PC (formerly PCMCIA)
card that includes an integral TP/FT- 10
transceiver. Other transceiver types can be
connected to the PCC-10 via external transceiver
"pods". The PCC- 10 can be used as an LNS high
performance network interface by selecting
PCC10VNI from the NI Application field of the
L ON W ORKS Plug 'n Play control panel. It can
be used as a standard interface by selecting
PCC10NSI from the NI Application field.
SLTA-10 The SLTA- 10 is a serial interface with built-in
twisted pair transceiver that connects to any host
with an EIA-232 (formerly RS232) port. It can
also connect to the host remotely using a Hayes
compatible modem. You can use the SLTA- 10 for
remote applications that cannot use the OpenLDV
xDriver software, or for portable hosts that do not
contain a type II PC card slot.