Echelon LNS User Manual
Page 313
Advertising
LNS Programmer's Guide
299
Figure 13.4 Transfer Step Selection Window
2. There are three tasks you will perform with this window. Select the task you are
currently performing, and click Next to continue.
These tasks must be performed in the order they are listed. You must perform
steps 1 and 3 are on the PC that will receive the transferred credits, and you
must perform step 2 on the PC providing the credits. A floppy disk or a shared
drive, such as a mapped network drive, is required to complete the transfer.
When you perform step 1, you will also need to select the drive the LNS Device
Credits will be transferred to. You will use the dialog shown in Figure 13.5 to do
so.
Advertising