Electrocompaniet EMP 1 - Manual (Page 12)

1
6 Select the corresponding setup that fit to
your installation for the Front, Center and
surround speakers.
OFF
(Only for CENTER and SURROUND
speakers)
Select when no Center speakers are connected
and you want the sound to be routed to the
left/right front speakers (Stereo).
LARGE
Select if the connected speakers can
reproduce low frequency signals below
120 Hz.
SMALL
Select if the connected speakers cannot repro-
duce low frequency signals below 120 Hz.
[SUB WOOFER]
ON
Select when a sub woofer is connected.
OFF
Select when no sub woofer is connected.
[SPEAKERS VOLUME]
Volume level setting for individual speakers
(-6dB ~ +6dB).
Note !
If you have EC4.9 in your system, use the
more advanced speaker volume and balance
setting included in that system.
[SPEAKERS DELAY]
Delay time settings in relation to the listen-
ing position distance for center and surround
speakers (0 MS~1S MS).
Press ◄► to adjust the setting that best suits
your surround sound needs.
Press ENTER/OK to confirm.
Notes:
Use a longer delay time setting when the sur-
round speakers are closer to the listener then
the front speakers.
A test tone will be automatically generated to
help you judge the sound level of each speaker
CENTER
SURROUND L
SURROUND R
AUDIO SETUP PAGE
0 Ms
0 Ms
0 Ms
Getting Started