Electrocompaniet EMP 1 - Manual (Page 13)

1
14. Basic Playback
1 Press any button at the front panel to
wake up the unit
2 On the front panel, press and hold ▼ for
two second to open the disc loading tray.
3 Place the chosen discs in the tray, printed
side up.
4 Press ▲ to close and play.
The disc tray closes and playback starts
automatically.
Important:
• If the inhibit icon (x or X) appears on
the TV screen when a button is pressed,
the function for that button is not avail
able on the current disc or at the current
time.
• Depending on the DVD or VIDEO CD
disc, some operations may operate differ
ently or be restricted.
• Do not push on the disc tray or put any
objects other then discs on the disc tray.
Doing so may cause the disc player to
malfunction
15. General Operation
Unless otherwise stated, all operations
described here are carried out using the
remote control for this player.
Pausing playback
1 During playback, press PAUSE
;
• Playback will pause and the sound will
be muted.
2 Press PAUSE ; again to select the next
picture frame.
3 To resume normal playback, press
PLAY ►
Selecting a track/chapter
Press 9 : or use the numeric keypad (0-9)
to key in a trac/chapter number.
During repeat playback of a track/chapter,
pressing 9 : will replay the same track/
chapter.
Searching backward/forward
Press and hold 9 :, then press
PLAY ► to resume normal playback.
While searching, pressing 9 : again will
increase the search speed.
Note:
For MP3, WMA and DivX®, the search
function allows you to search the track
currently being played.
Stopping playback
Press STOP/EJECT ■
Disc Operation -
General