Electrocompaniet EMP 1 - Manual (Page 9)

9
8. Remote Control, Inserting batteries
1 Open the battery compartment
2 Insert two type R06 or AA batteries,
following the indications (+/-) inside
the compartment.
3 Close the cover.
9. Turning on the Power
1 Connect the AC power cord to an AC
outlet.
2 Turn on your TV and AV receiver.
3 Select the appropriate input source
at the AV receiver that was used to
connect to chis player. Refer to the
owner’s manual for your component
for details.
4 Turn on this player.
5 Set the TV to the correct Video IN
channel. (e.g. EXT1, EXT2, AV1,
AVZ AUDIO/VIDEO, ecc. Refer
to the owner’s manual for your TV for
details.)
• The front display lights up and the
default screen appears on the TV.
10. Selecting a color system for your TV
This player it compatible with both NTSC and
PAL video formats. Select the color system
that matches your TV.
1 Press SETUP
2 Press ► repeatedly to select [VIDEO
SETUP PAGE].
3 Press ▲▼ to highlight [TVTYPE],
then press ►
TV TYPE
TV DISPLAY
BLACK LEVEL
CLOSED CAPTION
PICYURE SETTING
ADV PICTURE
PAL
NTSC
MULTI
VIDEO SETUP PAGE
Getting Started