EXFO iOLM - Manual (Page 131)

Managing Results
intelligent Optical Link Mapper 125
Managing Elements and Analyzing Links (Optional, iOLM EXpert and Loopback Modes)
Managing Elements and Analyzing Links
(Optional, iOLM EXpert and Loopback Modes)
The application allows you to add and delete elements from both the Link
view and Elements tab. You can also analyze the link.
Note: These functionalities are available only if the iOLM EXpert option is
activated.
Adding Elements
The iOLM application allows you to add elements by selecting any element
or fiber section.
Note: You cannot add elements on the link of a loopback measurement for the
original measurement.
Note: You cannot add an element after the last element.
Note: When an element is edited on a multimode wavelength, it is impossible to
change the type of this element to a splitter.