Modifying link pass/fail thresholds – EXFO iOLM User Manual
Page 75
Advertising
Managing Test Configurations
intelligent Optical Link Mapper
69
Modifying a Test Configuration
Modifying Link Pass/Fail Thresholds
This tab allows you to apply modification to the link pass/fail thresholds. If
the selected wavelength is Any, the values edited will be applied to all the
wavelengths present.
Note: Pass/Fail thresholds cannot be viewed or edited for some configurations
related to specific standards.
To modify link pass/fail thresholds:
1. From the Main Menu, tap Test Config.
Advertising