EXFO iOLM - Manual (Page 145)

Managing Files
intelligent Optical Link Mapper 139
Saving iOLM Files
Saving iOLM Files
The Save or Save As menu item allows you to save an existing iOLM file on
the disk.
If the wavelengths file name component is selected under the Filename
tab, then all of the iOLM wavelengths present in the iOLM measurement
are added to the file name. If the power meter measurement is present in
the application, wavelengths used for the measurement are also added to
the file name. For example, if the wavelength is the only file name
component selected under the Filename tab, the iOLM measurement is
done at 1625 nm and the power meter measurement is done at
1490 nm + 1550 nm then the file name will be “1625_1490 + 1550.iolm”.
To save iOLM files:
1. From the Main Menu, tap File.