EXFO iOLM - Manual (Page 33)

Setting User Preferences
intelligent Optical Link Mapper 27
Defining Measurement Identification
2. Select the Identification tab.
3. Define the identification information as needed.
The range describes the auto-increment start and stop values for the
identifiers. It is specified in the Identifiers tab under the Test
Configuration window.
The file name generated for future acquisitions will contain the
combination of the numeric and alphanumeric values specified in the
respective fields. For more information on file autonaming, see
Naming iOLM Files Automatically on page 33.
4. Select the direction of the iOLM file from the Direction option.
5. Tap Apply to save the changes.
6. Tap OK to save the changes and close the window, or tap Cancel to
exit without saving.
Tap Revert to Factory Settings to remove all the changes and apply the
default values.
Identifiers and range define
in the Identifiers tab
Numeric and alphanumeric
values