Measurement information – EXFO iOLM User Manual
Page 140
Managing Results
134
iOLM
Measurement Information
Measurement Information
You can find information about a measurement, in the application, such as
the file name, the acquisition date, the acquisition status, the analysis
version, and the test method.
The acquisition status indicates if the acquisition has been taken
normally or if it has been interrupted.
The analysis version is the version of the application used to analyze
the measurement. It is the same as the install kit version.
The test method indicates if the measurement was performed in
loopback mode or not.
You can also have access to the identification information and to the
measurement settings.
To view measurement information:
From the main window, tap Measurement Info.
Note: If file autonaming is deactivated, the file name will be “---”.