EZ-ACCESS PATHWA MODULAR ACCESS SYSTEM - Manual (Page 2)

- 2 -
ASSEMBLY MANUAL
For EZ-ACCESS
®
Pathway
®
Modular Access System
ATTENTION INSTALLER:

For residential use only!

850 lb. weight capacity
 Read all instructions, including ‘PERIODIC MAINTENANCE AND SAFETY,' prior to ramp
assembly

Please leave this ASSEMBLY MANUAL with the end user
ATTENTION END USER:

850 lb. weight capacity

Please read and become familiar with the ‘PERIODIC MAINTENANCE AND SAFETY’ section
of this manual

Fill out and return warranty registration
TOOLS TYPICALLY REQUIRED:
 1/2 ″
SOCKET OR 1/2 ″
WRENCH
 9/16 ″
SOCKET OR 9/16 ″
WRENCH
 5/16 ″
DRILL BIT ( IF BRACE ASSEMBLIES ARE USED )
 1/8 ″
DRILL BIT
 1/4 ″
MASONRY DRILL BIT ( USED WHEN INSTALLING TO CONCRETE PORCH , STEP , ETC .)
 5/32 ″
ALLEN WRENCH ( INCLUDED )
 3/16 ″
ALLEN WRENCH ( INCLUDED )
 #2
PHILLIPS HEAD SCREW DRIVER

BOX KNIFE
 25’
TAPE MEASURE

HAMMER

LEVEL

RUBBER MALLET

FILE

POWER DRILL

HACKSAW ( FOR OPTIONAL HANDRAIL KITS )

DIGGING TOOLS ( IF AN OBSTACLE NEEDS TO BE REMOVED )

TWO ABLE - BODIED PERSONS NEEDED FOR INSTALLATION
VIEW PACKING LIST: Each ramp system is shipped with a packing list. Be sure to check that all
items and tools are present before starting installation.