Hall Research SC-1080D - Manual (Page 10)

8
Multi-format PC/HD Video Scaler
3. Configuration and Operation
3.1 Front Panel
1. Power: Press this button to turn ON or turn OFF (standby) the power to
the unit.
2. Menu/Enter: This button serves two purposes.
A. Pressing the button will bring up the OSD main menu as shown in
the "OSD Menus" section of this manual.
B. To act as an "Enter" key to enter sub menu or to adjust setting value
of the selected parameter.
3.
▲ or ▼ buttons: The buttons provide 3 functions:
A. Input Select (
▲): Press the ▲ button repeatedly to select your
desired input source. The input sources are toggled through in the
following sequence.
B. Auto Tune (
▼): Press the ▼ button to initiate picture auto adjust for
analog inputs (component or PC/VGA). The scaler will fine tune the
position (centering) and color of the output picture.
Figure 6
Input Selection Sequence
Figure 5 –
Front Panel 1 2 3 5 4