Hall Research SC-1080D User Manual
Page 11
Model SC-1080D
9
C. When in the OSD menu mode: Press the
▲ or ▼ buttons to move
up or down the highlighted bar to the desired parameter. Once a
parameter is highlighted then press the MENU / Enter button to adjust
the setting.
4. Input LED Indicators: The illuminated LED indicates that
corresponding source is being selected as input.
5. IR Sensor: Infrared remote control sensor.
Front Panel Quick Selection “Hot Keys”
Figure 7
If you are not getting any image on your display, it could be that the output
resolution setting of the SC-1080D is not supported by your LCD. Using serial
commands or the IR remote, one can quickly switch between various output
resolutions. However since the front panel operation relies on OSD menu for
navigation, it is very difficult to change the output setting from the front panel if
you cannot see the OSD. Therefore to quickly jump to a basic resolution that is
supported by virtually all displays, is a great feature.
If you press and hold down
If you press and
the MENU button, and then hit the
▲ button you
get a XGA output which is supported by most PC compatible displays.
hold down
the MENU button, and then hit the
▼ button you
get a 480p output which is supported by most HDTV compatible displays.