Hall Research SC-1080D - Manual (Page 7)

Model SC-1080D
5
2. Installation
2.1 Connecting the Video Inputs and Outputs
The video scaler can accept a VGA (analog RGBHV from PC), DVI (digital
video from PC or HDMI™ source), and Component Video (Y Pb Pr) from any
source.
When the source is from an HDMI™ output, an HDMI to DVI cable or adapter
is required. Please contact Hall Research if you need to purchase this cable.
Two outputs connectors are provided. Both show the selected input at the
desired output resolution.
Figure 2 - Rear Panel
Video cables for connecting the I/O ports are not supplied with the unit.
If you would like to mount the unit in a rack, please contact Hall Research to
purchase a rack-mount accessory kit for the unit.
Figure 3 – Optional Rack-mount Kit