Hall Research SC-1080D - Manual (Page 13)

Model SC-1080D
11
completed; press the MENU button to leave that parameter. Move the highlight
bar to EXIT, and then press the MENU button to exit.
Note: The "H-position" and "V-position" are only available when the component
or PC (VGA) input is selected
Picture mode - There are 4 picture modes to choose from:
User: Select to adjust the parameters to your favorite levels and then
automatically store it.
Standard: Standard factory default settings for optimal display
Vivid: High saturation picture for optimal display in a bright room.
Movie: Picture for comfortable low brightness display in a dark room.
Scale - select over-scan when the input source is SD or HD video to ensure there
is no black band around screen boundary. Select under-scan
Mirror – Select mirror to horizontally flip the image. This is useful for
teleprompting and rear projection systems.
when input source is
a PC signal to ensure entire contents (all the way to the edge) are within the
screen boundary.
Noise Reduction - This function only works when the input source is analog
RGB or component. It will not work for the DVI input. There are four steps of
Noise Reduction: Off, Low, Middle, High. The Noise Reduction will remove the
noise that results from the analog to digital conversion and digital scaling
process.
H & V position – Adjusts the horizontal and vertical position of the image.
Color Submenu:
User: Select to adjust to your favorite color temperature setting.
Normal: Normal color tone setting where white is pure white.
Warm: Warm color tone (white reddish).
Cool: Cool color tone (white bluish).
Output Submenu:
This submenu is used to set the desired output resolution. When Native is
selected the unit reads the native resolution of the connected LCD (via its EDID)
and sets its resolution to match it if possible. If both outputs are connected
(HD15 and DVI/HDMI™); then the native resolution of the DVI display is used.