Dimplex DF3215NH - Manual (Page 14)

14
D - Flame Speed Control
1. Press the
G - Flame & Heat On/Off button to turn the Flame &
heat on.
2. Press the N - Flame Speed Up button to increase the speed of the
flame.
3. Press the M - Flame Speed Down button to decrease the speed of
the flame.
E - Slow Start/Fading Embers Control
The
Slow Start function simulates a starting fire. The function is
automatically programmed for 30 seconds and the timer setting cannot
be changed. The Fading Embers function simulates a fire going out.
The Fading Embers timer can be set to 1, 5 or 10 minutes.
1. Press the P - Slow Start/Fading Embers On/Timer Cycle button
to turn the Slow Start/Fading Embers function on.
2. Press the P - Slow Start/Fading Embers On/Timer Cycle button
repeatedly to set the Fading Embers timer to 1, 5 or 10 minutes.
3. Press the O - Slow Start/Fading Embers Off button to turn the
Fading Embers timer function off.
F - Purifire™ Speed
When the
Purifire™ function is on, the Purifire™ symbol will flash.
When off the symbol will be solid. The default setting for the Purifire™
is set at low speed.
1. Press the
H - Purifire™ On/Off button to turn the Purifire™
function On.
2. Press the Q - Purifire™ Low Speed to decrease the Purifire™
speed or the R - Purifire™ High Speed to increase the speed.
3. Press the H - Purifire™ On/Off button to turn the Purifire™
function off.
! NOTE: To turn the Flame & heat and Purifire™ off, press both
control buttons simultaneously.
G - Flame & Heat On/Off *
Press the
G - Flame & Heat On/Off button to turn the Flame & heat
function on. When the B - Set Temperature is higher then the