Glass cleaning, Fireplace surface cleaning – Dimplex DF3215NH User Manual

Page 19

Advertising
background image

19

x 1 inch rated at MERv 10. If using an after market filter follow the

manufacturers recommended replacement instructions.

To replace filter:
1. Open the Bi-fold

doors.

2. Remove the three

(3) mounting screws

from the Air Filter

Bracket.

3. Remove the Air

Filter Bracket

assembly from the

firebox.

4. Slide Filter out of Air

Filter Bracket.

5. Replace filter and

reassemble in

reverse order as above.

!

NOTE: If after market air filter is used ensure it is installed

according to the manufacturer’s recommended instructions.

Glass Cleaning

The glass is cleaned in the factory during the assembly operation.

During shipment, installation, handling, etc., the glass may collect dust

particles, these can be removed by dusting lightly with a clean dry

cloth.
To remove fingerprints or other marks, the glass can be cleaned with

a damp cloth. To prevent scratching, do not use abrasive cleaners or

spray liquids on the glass surface.

Fireplace Surface Cleaning

Use a cloth dampened with warm water only to clean painted surfaces

of the electric fireplace. Do not use abrasive cleaners.

Figure 11

Air Filter

Bracket

Mounting

Screws

Advertising