Dimplex DF3215NH - Manual (Page 8)

8
Bi-fold Door Installation (Figure 2)
Figure 2
Bi-fold
Door
Door
Spacer
Mounting
hole
Screw
Bottom
Ledge
i. Remove the Bi-fold doors from packaging.
ii. Remove the Philips head screw and the door spacer from the
bottom edge of the Bi-fold door opposite of the door handle.
iii. Insert the door spacer into the bottom panel ledge mounting
hole.
iv. Insert the top edge of the Bi-fold door into the top door track on
the fireplace.
v. Secure the Bi-fold door to unit with supplied screw using a short
handled screwdriver.
! NOTE: If short handled screwdriver is not available tilt the unit
back.
vi. Repeat steps 2-5 for the other side.
2. Install the fireplace assembly into the mantel (refer to Dimplex
mantel assembly instructions).