Hatteland Display 20 inch - HM 20T07 MIL-H - Manual (Page 22)

22
IND100064-27
Power ON: To turn the unit on, press down the power button. The power light indicator (LED) will illuminate green.
(If no signal is detected, the screen will be black and the power light indicator (LED) will illuminate red).
Power OFF: To turn the unit off, press and hold the power button down for 3 seconds. The power light indicator will be off/black.
BRIGHTNESS ADJUSTMENT CONTROLS:
The unit features a 100% dimmable image, which means it is capable of displaying a completely black image when the
BRIGHTNESS knob is turned fully to the left.
NOTE1: For ECDIS systems the brightness knob indication mark should be aligned directly with the indication mark
located on the label. (See illustration FIG1)
AUTOMATIC POWER LIGHT DIMMING:
The unit features a Power LED Dimmer function which control the light intensity of the power light indicator. There are two different
solutions for this feature.
1- Intelligent Auto Power LED Dimmer which control the light intensity based on your environment lightning. This can also
be manually adjusted using the Led Adjust knob on the rear side of the display.
2- The light intensity is regulated according to the backlight, that is according to the brightness knob. With the exception that
when the backlight brightness is zero, the power led is just visible in dark environment. This means that the power led is
not visible in daylight when the brightness knob is turned fully to the left.
ASSIGNABLE HOT KEYS:
The user can assign various display functions as hot keys (increase/decrease). This will enable the user to quickly adjust the
brightness, image size, contrast or other functions to control the image. To assign these hot keys, enter the “UTILITIES MENU/
DIRECT ACCESS” menu and change them to the desired hot key function. Default is to increase/decrease brightness.
Operation
User Controls
Power button
Power Light Indicator
Brightness Knob
Assignable Hot Keys
START-UP:
The unit features a Instant-ON / Delay-OFF functionality, which ensures that it is not turned off by user accident. The location is on
the right bottom side of the unit together with the other user controls as illustrated in the labels below.
Indication Mark (Note1) FIG 1