Specifications - hm 20t07 mil-hx, Specifications – Hatteland Display 20 inch - HM 20T07 MIL-H User Manual
Page 33
33
IND100129-107
Specifications - HM 20T07 MIL-Hx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
TFT Technology:
• High Quality SHARP TFT
• 20.1” viewable image size
• a-Si TFT (Thin Film Transistor) Active Matrix
• Optical Bonding Technology
TFT Characteristics:
• Native Resolution
: 1600 x 1200
• Pixel Pitch (RGB)
: 0.255 (H) x 0.255 (V) mm
• Response Time
: 20 ms (typical), rise + fall
• Contrast Ratio
: 500:1 (typical)
• Light Intensity
: 250 cd/m2 (typical)
• Viewable Angle
: +/- 88° (typical) (Up/Down/Left/Right)
• Active Display Area
: 408.0 (H) x 306.0 (V) mm
• Max Colors
: 16.7 million
Synchronization:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects VGA -> UXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p- Input Impedance 75Ω
• Horizontal
: 15.0 kHz to 91 kHz
• Vertical
: 56 Hz* to 75 Hz
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024
• UXGA
: 1600 x 1200*
* Recommended in 60Hz for optimal picture quality. 56 Hz only in 800x600
Video Signals:
• Composite video (Interlaced NTSC and PAL/SECAM video)
Power Supply:
• 115&230VAC - 50/60Hz
= HM 20T07 MIL-H1 models
• 24 VDC
= HM 20T07 MIL-H2 models
Power Specifications
• Power Consumption: Operating 75W (typical) - 100W (max)
Physical Dimensions:
• 534.00 (W) x 481.00 (H) x 147.00 (D) mm (with handles)
• 21.02" (W) x 18.94" (H) x 4.99" (D)
• Weight: 14 kg approx
Input Signal Terminal:
• RGB Signal IN
: 5 x BNC Connectors (RGBHV)
• RGB Signal OUT
: 1 x 15p HD D-SUB (female)
• Comp. Video IN
: 1 x BNC Connector
• Serial Remote Contr. : 2 x 9p D-SUB
• AC Power IN
: Std IEC Inlet
• DC Power IN
: Screw terminal
• If Touch Screen I/O : 1 x 9P D-SUB (female) RS-232 communication
User Controls:
• On Front bezel
: Power On/Off (push button)
+ Brightness Control Rotary Knob
+ 2 x hotkeys support (push buttons)
+ Mode Status LED
• Behind bezel hatch
: On Screen Display control (OSD/OSM)
• Behind rear hatch
: Serial Remote Control DIP-switches/settings
Environmental Considerations:
• Operating
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage
: Temperature -40 deg. C to +70 deg. C
- Humidity up to 95%
• IP Rating
: Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist.
: Standard: 115cm Steering: 70cm
The unit is tested according to the following:
MIL-STD 461E, 1999
• CE 101 - Conducted emission, 30 Hz - 10 kHz
• CE 102 - Conducted emissions, 10 kHz - 10 Mhz
• CS 101 - Conducted susceptibility, 30 Hz - 50 kHz
• CS 114 - Conducted susceptibility, 10 kHz - 200 MHz
• CS 116 - Conducted susceptibility, damped oscillatory waves
• RE 101 - Radiated emission, H-field, 30 Hz - 100 kHz
• RE 102 - Radiated emissions, E-field, 10 kHz - 10 GHz
• RS 101 - Radiated susceptibility, H-field, 30 Hz - 100 kHz
• RS 103 - Radiated susceptibility, E-field, 2 MHz - 18 GHz
• HM 20T07 MIL-H1
= AC Power, optically bonded
• HM 20T07 MIL-H2
= DC Power, optically bonded
• Resistive Touch Screen (8-wire)
• Color Calibrated models (ECDIS)
• JH MMDBR STD-A1 = Bracket (See user manual)
• JH MMDRO STD-A1 = Rotary Bracket (See user manual)
• JH 20TSV STD-B1 = Sun Visor (See user manual)
• JH VESA 20T06-A1 = Vesa Bracket (See user manual)
• JH 20TWC STD-B1 = Water Cover (See user manual)
Technical Description:
Mechanical Description:
Environmental Performance (in addition to IEC 60945):
EMI Testing:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
EN60945 4th (IEC945 4th)
MIL-S-901D Class I (hard-mounted) Grade A Shock
BV - Bureau Veritas
MIL-STD 461E, 1999
ClassNK - Nippon Kaiji Kyokai
DNV - Det Norske Veritas
GL - Germanischer Lloyd
LRS - Lloyd’s Register of Shipping
ABS - American Bureau of Shipping
EU RO MR - Mutual Recognition
CCS - China Classification Society
Common Type Numbers:
Factory Options:
Accessories:
TEST
LEVEL
SPECIFICATION
Dry heat storage
70 deg. C
IEC 60068-2-2 (1974), Test Bd
Cold storage
-40 deg. C
IEC 60068-2-1 (1990), Test Ad
Vibration
4-33Hz
MIL STD 167-1
Shock
50g / 30ms
IEC 60068-2-27 (1987), Test Ea
Grade A Shock
Class I (hard-mounted)
MIL-S-901D
Vibration Testing
-
MIL-STD-167-1 *
* Console mounted.