Hatteland Display HT 221 (2U Size) - Manual (Page 21)

Physical Connections
21
IND100133-55
GROUNDING SCREW:
Please review “General Installation Chapter”, pt. 6 for more information.
AC Power INPUT:
The internal AC power module supports both 115VAC/60Hz and 230/50Hz power input using a standard IEC
European power plug. See specifications for more information.
1+1 x COM Serial Port INPUT/OUTPUT:
Supports RS-232 (COM1) or RS-485/422 (COM2) using D-SUB 9P Male on-board connectors. Fasten the cable to the
connector using the provided screws on the cable housing itself. For configuration, please review the Appendix
chapter, section “BIOS - On-board COM Ports Configuration”.
Connector area of computer
Power Input AC
RS-485/422 COM2 USB2.0
DVI-I
PCIe x16
DisplayPort
PCIe x4
PCI PCIe x1
DVI-D
RS-232 COM1 USB3.0 USB
2.0/1.1
Grounding Screw
+ Expansion for
4 x PCI Brackets
Cable Relief:
The unit has been factory pre-mounted with
a Cable Relief Bracket to ensure secure and
stable locking of cables after securing them
to their resepective connectors. Illustrations
from side and top view.
Network Intel GBLAN
i210 (top)
i217-LM (bottom)
Network Realtek
GBLAN #2 / #1