Hatteland Display HT 221 (2U Size) - Manual (Page 47)

47 Appendix
IND100077-154
BIOS - How to create RAID volume
Instructions
Before configuring it is assumed the user has the appropriate knowledge on how to enter and navigate within BIOS
and change values. When BIOS screen has been accessed, follow the steps below.
1: Go to Advanced / SATA Configuration, and click enter:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
PCI Subsystem Settings
ACPI Settings
CPU Configuration
SATA Configuration
PCH-FW Configuration
AMT Configuration
USB Configuration
NCT6102D Super IO Configuration
NCT6102D HW Monitor
Preheat Function Configuration
Option Rom Policy
Intel RC Drivers Version Detail
Advanced
SATA Configuration
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optmized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Main Chipset Boot Security Save & Exit
2: Set SATA mode selection: RAID, and click enter:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
Serial ATA Port 1 Empty
Port 1 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 2 Empty
Port 2 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 3 INTEL SSDSC2BB (80.0GB)
Port 3 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 4 Empty
Port 4 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 5 Empty
Port 5 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 6 Empty
Port 6 [Enabled]
Hot Plug [Disabled]
Advanced
Determine how SATA
controller(s) operate.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optmized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
IDE
AHCI
SATA Mode Selection
RAID
3: Press F4 and Enter to save settings and reboot.