Konig Electronic WLAN router 300 Mbps - Manual (Page 6)

6
2) HOW TO OPERATE
Step 1. Insert the Ethernet cable into the LAN
Port:
Insert one end of the Ethernet patch cable into
the LAN port on the back panel of the router, and
the other end into an available Ethernet port on
the network adapter of the computer you will use
to configure the unit.
Step 2. Insert the Ethernet patch cable into
the wired WAN port:
Insert the Ethernet patch cable from the DSL
modem into the wired WAN port on the back
panel of the router.
Step 3. Power on the router:
Connect the power adapter to the receptor on the
back panel of your router.
Step 4. Complete the setup.