English – Laerdal Stifneck Select Collars User Manual

Page 4

Advertising
background image

4

5

Intended Use

This product is intended to support cervical spine in a

neutral position during transportation, in combination with

other cervical and full body immobilization devices (CSIDs

and FBSIDs).

Cannula hooks are provided for the securement of

supplemental oxygen lines.

Important

In cases of a suspected spinal cord injury, proper neck

immobilization is only one part of total immobilization.

It is imperative that the patient be properly

immobilized to prevent any movement of the spinal

column.

Warnings

Stifneck Select Collars should only be used by

qualified healthcare providers.

Improper use may result in injury or permanent

disability. Always follow local spinal immobilization

protocol.

Use the correct size collar. An oversized collar may

hyperextend a patient’s cervical spine. An undersized

collar may not provide appropriate stability.

Do not adjust the Select or Pedi-Select collar on

patient.

User Instructions

1. measure the Patient

Neutral position

Shoulder to chin

Align the head to neutral or “eyes forward” position

unless contraindicated by local protocol.

2. match the collar size to the patient:

Select: Choose from 4 adult positions.

Pedi-Select: Choose from 3 Paediatric positions.

Plastic edge to size window.

3. Adjust and Lock the adjustable collar

Adjust the chin support to the size

selected in step 2.

Use the same method for adjusting both Collars.

Lock both sides by pressing the two lock tabs.

4. Preform the collar

5. Apply the collar while manually maintaining neutral

head position

Place the chin support under the chin. If a different size is

needed, remove, resize, and re-apply the collar.

Pull the back of the collar snug while holding the front in

place, and then fasten.

For a supine patient, slide the rear panel behind the neck

before placing the chin support.

Technical Specifications

Storage:

Do not store collar in folded position.

Store in flat position.

Storage Temperature Range:

-34 °C to 52 °C

(-30 °F to 125 °F)

Operating Temperature Range:

-25 °C to 43 °C

(-13 °F to 110 °F)

English

Stiffneck DFU Multi_All_revG.indd 4

02.05.12 11:16

Advertising